Patch Driver TV Tuner Gadmei 330+

Posted on January 12, 2008, 11:53 am, by gustaroska, under Internet, Komputer, Linux, Pribadi.

Titipan posting lagi nih.. Bagi bagi informasi bagi pengguna TV Tuner Gadmei 330+ yang sedikit bermasalah dengan tidak munculnya audio, ketika TV Tuner dijalankan. Silahkan ikuti langkah langkah dibawah ini…

1. download driver

refit@gustaroska:$ hg clone http://mcentral.de/hg/~mrec/v4l-dvb-experimental
refit@gustaroska:$ cd v4l-dvb-experimental

2. define board identity
refit@gustaroska:$ gedit ./linux/drivers/media/video/em28xx/em28xx.h

#define EM2861_BOARD_GADMEI_UTV330 62

3. nambahin konfigurasi board yg di define di atas

refit@gustaroska:$ gedit ./linux/drivers/media/video/em28xx/em28xx-cards.c

find (CTRL+F) “EM2860_BOARD_GADMEI_UTV330″, lalu selipkan code2 berikut sesuai dengan urutan pencarian dari atas ke bawah

/* pertama */

[EM2861_BOARD_GADMEI_UTV330] = {
.name = “Gadmei UTV330+”,
.vchannels = 3,
.norm = V4L2_STD_NTSC,
.tuner_type = TUNER_TNF_5335MF,
.tda9887_conf = TDA9887_PRESENT,
.has_tuner = 1,
.decoder = EM28XX_SAA7113,
.dev_modes = EM28XX_VIDEO,
.input = {{
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = 0,
},{
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
.amux = 1,
},{
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = 1,
}},
.tvnorms = {{
.name = “NTSC”,
.id = V4L2_STD_NTSC,
},{
.name = “PAL-DK”,
.id = V4L2_STD_PAL_DK,
}},
},

/* kedua */

case EM2861_BOARD_GADMEI_UTV330:
{
/* Turn on IR */
em28xx_write_regs(dev, R0F_XCLK_REG, “\x07″, 1);
em28xx_write_regs(dev, R06_I2C_CLK_REG, “\x40″, 1);
em2880_ir_attach(dev, ir_codes_em_gadmei_usb, ARRAY_SIZE(ir_codes_em_gadmei_usb), em2880_get_key_pinnacle);
break;
}

/* ketiga */

case EM2861_BOARD_GADMEI_UTV330:
{
em2880_ir_detach(dev);
break;
}

4. compile & install

refit@gustaroska:$ make
refit@gustaroska:$ sudo make install
refit@gustaroska:$ sudo modprobe em28xx

5. nambahin konfigurasi

refit@gustaroska:$ sudo vim /etc/modprobe.conf

options em28xx card=62

6. restart & colokin tv tuner

7. message yang muncul kalo sukses

refit@gustaroska:$ dmesg | grep em28xx

[ 2726.744000] em28xx new video device (eb1a:2861): interface 0, class 255
[ 2726.744000] em28xx: device is attached to a USB 2.0 bus
[ 2726.744000] em28xx: you’re using the experimental/unstable tree from mcentral.de
[ 2726.744000] em28xx: there’s also a stable tree available but which is limited to
[ 2726.744000] em28xx: linux <=2.6.19.2
[ 2726.744000] em28xx: it’s fine to use this driver but keep in mind that it will move
[ 2726.744000] em28xx: to http://mcentral.de/hg/~mrec/v4l-dvb-kernel as soon as it’s
[ 2726.744000] em28xx: proved to be stable
[ 2726.744000] em28xx #0: Alternate settings: 8
[ 2726.744000] em28xx #0: Alternate setting 0, max size= 0
[ 2726.744000] em28xx #0: Alternate setting 1, max size= 0
[ 2726.744000] em28xx #0: Alternate setting 2, max size= 1448
[ 2726.744000] em28xx #0: Alternate setting 3, max size= 2048
[ 2726.744000] em28xx #0: Alternate setting 4, max size= 2304
[ 2726.744000] em28xx #0: Alternate setting 5, max size= 2580
[ 2726.744000] em28xx #0: Alternate setting 6, max size= 2892
[ 2726.744000] em28xx #0: Alternate setting 7, max size= 3072
[ 2726.800000] em28xx-input.c: remote control handler attached
[ 2726.828000] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 61 28 50 00 13 03 6a 22 00 00
[ 2726.828000] em28xx #0: i2c eeprom 10: 00 00 04 57 4e 03 00 00 00 00 00 00 00 00 00 00
[ 2726.828000] em28xx #0: i2c eeprom 20: 06 00 01 01 f0 10 01 00 4a 00 00 00 5b 00 00 00
[ 2726.828000] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 02 01 00 00 00 00
[ 2726.828000] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2726.828000] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2726.828000] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00
[ 2726.828000] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 36 00 31 00 20 00 44 00
[ 2726.828000] em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00
[ 2726.828000] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2726.828000] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2726.828000] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2726.828000] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2726.828000] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2726.828000] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2726.828000] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2726.828000] tuner 0-0060: chip found @ 0xc0 (em28xx #0)
[ 2726.856000] saa7115 0-0025: saa7113 found (1f7113d0e100000) @ 0×4a (em28xx #0)
[ 2726.892000] em28xx #0: V4L2 device registered as /dev/video0
[ 2726.892000] em28xx #0: Found Gadmei UTV330+

Powered by ScribeFire.

Update : Posting ini barusan di-update sesuai dengan petunjuk empunya dan meng-attach link file .zip yang isinya adalah driver yang sudah di-edit. Ekstrak file ini dan kopi (overwrite) ke direktori driver/media/video. Kemudian tambahkan line options em28xx card=62 di /etc/modprobe.conf. Jika file modprobe tidak ada,di create sendiri saja.

DOWNLOAD

Popularity: 100% [?]

  • Share/Bookmark

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.

Comment (RSS)  |  Trackback

79 Comments

Newer Comments »
  1. mulyanto says:
    January 17, 2008 at 11:05 am

    bos, saya pakai gadmei usb 330. Bagaimana caranya agar bisa dipakai di suse 10-3 ?

    terima kasih.

  2. marwin says:
    January 17, 2008 at 10:07 pm

    bos,saya pake gdmei 330 ,lg nyari sdk nya,kira” bs kasih tau googling dmn gt?thanks

  3. ariawan says:
    January 18, 2008 at 3:37 pm

    #mulyanto
    di suse 10.3 juga gak ada suaranya ya? saya rasa tetep bisa dengan cara / langkah diatas.. karena driver ini tidak menyangkut dengan distro manapun.

    #marwin
    sdk? wah.. saya gak tau deh itu apaan?

    * nunggu gustaroska komen *

  4. mulyanto says:
    January 23, 2008 at 4:59 pm

    #ariawan
    di suse 10.3 juga gak ada suaranya ya?…

    Ngga gitu, malah sama sekali nggak kedetect :).

  5. ariawan says:
    January 24, 2008 at 9:18 am

    #mulyanto
    gadmeinya gak kedetek ya? knapa ya? blom install drivernya kali? naah.. kalo dah install drivernya terus masih blom bersuara baru deh di patch..

  6. gustaroska says:
    January 30, 2008 at 4:23 pm

    di ubuntu juga defaultnya mang ga ke detect, caranya biar bisa kedetect ya install drivernya, cuma drivernya blom support untuk gadmei 330 , driver yang dari http://mcentral.de/hg/~mrec/v4l-dvb-experimental cuma support buat gadmei 330 (versi lama udah ga produksi).

    chipset yang dipake di gadmei 330 itu em2860, sedangkan di gadmei 330 itu em2861, saya pernah coba maksain gadmei 330 pake driver em28xx dgn card gadmei 330, tp hasilnya ga keluar suaranya, nah saya coba modif konfigurasi card gadmei 330 dgn make chipset em2861.

  7. pratomo says:
    January 31, 2008 at 4:33 am

    mas, aku juga masih katro’ neh masalah computer.
    aku pake laptop dell latitude D610, tapi pake gadmei tv box usb yang USB 2860. lah drivernya ilang. bisa kasih tahu ga dimana aku bisa download new driver.
    satu lagi nich, koq aku dulu waktu pake diver nyang lama, sound ga bisa langsung masuk ke komputer yak? harus pake ekternal audio (speaker aktip gituh)

    makasih bos,

    Pratomo

  8. HENDRA says:
    April 6, 2008 at 7:22 pm

    ALLOW………
    AQ PAKE GADMEI UTV 330 N AQ PAKE WINDOWS VISTA
    SOUNDNYA GAK KELUAR TOLONGIN DONG
    KATANYA SEH USB DRIVER 2861 NYA GAK BISA.
    GIMANA N DIMANA DAPAT DRIVERNYA YA ??
    THANKS BANGET

  9. wahyu says:
    April 8, 2008 at 11:18 am

    nice artikel. remotenya bisa jalan nggak di linux?

  10. gustaroska says:
    April 8, 2008 at 3:07 pm

    #hendra

    kebetulan saya juga pake UTV330 di vista dengan driver 2861 bawaan cd-nya, ga da masalah, cuma soundnya saya keluarin langsung ke speaker, ga lewat notebook dulu.

    #wahyu

    alhamdulillah remote nya jg jalan (beberapa tombol ga bisa), tp krn batrenya boros, saya lebih sering remote via bluetooth pake HP

  11. wahyu says:
    April 12, 2008 at 3:47 pm

    bisa minta tolong tutorial memfungsikan remote 330 di linux gak mas? atau link halaman yg sesuai. saya masih belom paham mengenai remotenya. kemaren dah berhasil kompile modul dan nonton tv pakai tvtime.

  12. Novrie says:
    April 14, 2008 at 11:30 pm

    Mas…
    Saya mengalami hal yg sama kalo USB 2861 devicenya ngak ke detect..saya menggunakan Win XP

    Thanks before

  13. Refit Gustaroska says:
    April 16, 2008 at 4:56 pm

    #wahyu

    Yang saya tau kalo untuk gadmei 330 udah jalan normal di linux dgn driver diatas pake chipet 2860, termasuk remotenya juga. cuma kalo yang 330 emang perlu di modif lagi kaya yg diatas, tp itu jg krn masalah suaranya, kalo remotenya pake fungsi yang sama kaya yg 330

    #novrie

    Saya kurang ngerti jg kalo di PC kmu devicenya ga ke detect, yg saya alami justru normal2 aja kalo di windows XP

  14. riyans says:
    April 18, 2008 at 2:26 pm

    gue punya masalah dengan usb TvBOx UTV330 .detek di hatware tapi gak mau di instal.kalau seperti itu apa masalahnya….!!!
    gue udah instal semuanya tapi tetap sama..!!

  15. kojo says:
    April 20, 2008 at 3:59 pm

    mas, kok error ya setelah gw coba..?? ada alternatif lain?

    kojo@kojobuntu:~$ hg clone http://mcentral.de.hg/~mrec/v4l-dvb-experimental
    destination directory: v4l-dvb-experimental
    abort: error: Name or service not known

    oh ya sebelumnya, gimana seh cara setting freq di tv tunernya, binyun banget nee…maklum, masih newbie…. (install driver sukses)

    /* Sebelum USB nyolok */
    ….
    [13371.004000] attach_inform: saa7113 detected.
    [13371.012000] em28xx #0: V4L2 device registered as /dev/video0
    [13371.012000] em28xx #0: Found Gadmei UTV330
    [13839.444000] usb 4-1: USB disconnect, address 7
    [13839.444000] em28xx-input.c: remote control handler detached
    [13839.444000] em28xx #0: disconnecting em28xx#0 video
    [13839.444000] em28xx #0: V4L2 VIDEO devices /dev/video0 deregistered

    /* setelah USB nyolok */
    …
    [13938.020000] tuner 0-0060: type set to 69 (Tena TNF 5335 and similar models)
    [13938.044000] saa7115 0-0025: saa7113 found (1f7113d0e100000) @ 0×4a (em28xx #0)
    [13938.076000] attach_inform: saa7113 detected.
    [13938.084000] em28xx #0: V4L2 device registered as /dev/video0
    [13938.084000] em28xx #0: Found Gadmei UTV330

    Mohon pencerahannya,
    thx….

  16. wahyu says:
    April 21, 2008 at 2:54 pm

    remotenya dah bisa mas, tapi sayang tombol u/ ngubah channelnya gak bisa jalan. itu bisa nggak ya konfigurasi tombolnya diubah sendiri. sepertinya kan ada kode2 heksadesimal u/ tombol2nya. biar bisa jalan gitu. terus gimana cara capture videonya? trims.

    #kojo
    kalau cara saya, pakai tvtime. ubah television standard jadi pal, dan close tvtime. buka konsole/gnome terminal. jalanin “tvtime-scanner”. tunggu sampe dapet frekuensinya (agak lama). buka lagi tvtime, pilih custom u/ pilihan frekuensi tablenya. semoga berhasil.

  17. Refit Gustaroska says:
    April 22, 2008 at 3:21 pm

    #wahyu

    iya emang, untuk ngubah channel yg pake tombol next and prev saya juga ga jalan, tp kalo pake nomor bisa. kayanya kita jg bisa ngubah sendiri sih konfigurasi tombol2nya, tp saya ga tau caranya and blom pernah ngoprek juga.

    saya juga dah sering coba tuh buat capture, blom bisa juga tuh sampe skrg, ntar klo kmu nemuin cara konfigurasi remote n capture share juga disini ya, pengen nyontek ;)

  18. kojo says:
    April 24, 2008 at 8:36 pm

    wew…
    thanx…mantap2..
    tapi boleh request ga untuk bahas “crossover” di ubuntu?? hehe kebanyakan maunya yaa??

    salam kenal..

  19. ruri says:
    May 12, 2008 at 9:43 am

    nanya dunk mas

    saya baru aja install 330
    trus saya pilih indonesia, trus saya scanning aja gitu
    kok ga ada channel yang ke tangkep ya?
    ato frekuensinya kita masukin manual sesuai dengan frekuensi TV di indo?

    bingung nih..
    thx for d help

  20. yuta says:
    May 15, 2008 at 8:57 am

    @ruri

    mestinya sih langsung ketangkep semua kalo auto scanning…

    coba dicek antenanya, berfungsi normalkah ?

    saya pernah kejadian gitu, ternyata biang keroknya kabel antenanya kurang pas masangnya…

  21. yuta says:
    May 15, 2008 at 11:43 am

    saya sudah mengikuti langkah2 diatas…

    tapi waktu ‘make’ kok muncul error yang panjang banget ya ?

    oh ya, saya pake gutsy…

    *tinggal tv tuner neh yang belum beres…

    kalo ini jalan bener2 bakal sayonara windows…*

    tq sebelumnya…

  22. yuta says:
    May 15, 2008 at 3:10 pm

    hmm…

    setelah googling setengah mati ketemu ini :

    http://www.2nrds.com/digital-tv-in-linux-with-em28xx-devices

    “Found in http://mcentral.de/wiki/index.php/Em2880 is a link to http://www.techjp.net/suse_103_terratec_cartetv_tnt which is an end-to-end description of SUSE 10.2 install. Whether you know French, or not, check out the instructions to modify make_config_compat.pl as follows:

    my $kdir=”/usr/src/linux-2.6.22.12-0.1”;”

    jadi intinya pada file make_config_compat.pl perlu dilakukan perubahan…

    sudah saya edit file tersebut…

    tapi kok tetep error ya waktu ‘make’nya…

    lokasi src saya di /usr/src/linux-headers-2.6.22-14 (bener kan ?)

    contoh kasusnya pada Suse, kalo pada Gutsy dimana ya file srcnya ?

    tq sebelumnya…

  23. ariawan says:
    May 16, 2008 at 4:19 pm

    #yuta
    error pas “make”-nya apaan emangnya?

  24. ibenoe says:
    May 17, 2008 at 10:23 am

    nanya Mas,
    aku dah donlod v4l-dvb-experimental-nya, trus udah ta` edit script-nya pas aku compile pesanya:
    1760: error: expected expression before ‘case’
    kurang tanda ato apa yah..?

    mohon bantuannya…
    Thx

  25. junaidi says:
    May 17, 2008 at 10:59 pm

    halo mas…ini mas saya mw tanya saya masih bingung dengan langkah 2 dan seterusnya….kemaren saya udah nemuin filenya cuma bingung cara ngeditnya…ya maklum masih kacangan…mohon bantuannya ya mas….trims

  26. yuta says:
    May 19, 2008 at 8:48 am

    Panjang banget errornya…
    Sepenggal akhirnya seperti ini :

    /home/deva/v4l-dvb-experimental/v4l/em28xx-cards.c:2284: error: ‘x40′ undeclared (first use in this function)
    /home/deva/v4l-dvb-experimental/v4l/em28xx-cards.c:2284: warning: passing argument 3 of ‘em28xx_write_regs’ from incompatible pointer type
    make[3]: *** [/home/deva/v4l-dvb-experimental/v4l/em28xx-cards.o] Error 1
    make[2]: *** [_module_/home/deva/v4l-dvb-experimental/v4l] Error 2
    make[2]: Leaving directory `/usr/src/linux-headers-2.6.22-14-generic’
    make[1]: *** [default] Error 2
    make[1]: Leaving directory `/home/deva/v4l-dvb-experimental/v4l’
    make: *** [all] Error 2

    Kalo aku nangkep dari penjelasan di >> http://www.2nrds.com/digital-tv-in-linux-with-em28xx-devices

  27. ariawan says:
    May 19, 2008 at 4:57 pm

    #all
    saya sudah update posting ini, dengan mengupload file driver yang sudah di edit. Silahkan download filenya kemudian ekstrak dan overwrite di direktori driver/media/video kemudian tambahkan line options em28xx card=62 pada /etc/modprobe.conf. the update is at the bottom of this post..

    download file

    thanks to gustaroska..

  28. yuta says:
    May 21, 2008 at 12:52 pm

    Problem solved…

    Tq banget banget Mas…

  29. Refit Gustaroska says:
    July 21, 2008 at 9:07 am

    Ri, gw mau nambahin buat hardy, drivernya di patch dulu, soalnya untuk kernel 2.24.16.xx strukturnya agak sdikit beda, hehe.. gw baru install hardy :D

    ref:
    http://ge.ubuntuforums.com/showthread.php?t=740473

  30. xeozus says:
    July 21, 2008 at 10:34 am

    Wah, terima kasih.. dengan gutsy biasanya kugunakan sox buat meredirect output audio tv tuner ke soundcard. Jadi gak sabar nunggu pulang dari kantor hari ini dan mencoba patch ini.

  31. ariawan says:
    July 21, 2008 at 5:16 pm

    #refit
    tulis ajah pit.. kan bisa nulis elu juga..

  32. Refit Gustaroska says:
    July 31, 2008 at 10:26 pm

    Buat yang suka make tvtime and hpnya sony ericsson (ato yg remote bawaannya rusak) bisa download bluetooth remote configurationnya disini https://help.ubuntu.com/community/BluetoothRemoteControl

  33. Refit Gustaroska says:
    August 1, 2008 at 8:02 am

    Buat yg susah download v4l-dvb-experimental via hg krn koneksinya lemot bisa download last updatenya (baru donlod seminggu sebelum posting ini) disini http://rapidshare.com/files/133958077/v4l-dvb-experimental.tar.gz, udah dipatch juga buat Gadmei 330 di Ubuntu Hardy (2.6.24.xx)

  34. Firmansyah says:
    August 5, 2008 at 9:52 am

    mas mnta driver bwt gadmei usb tv box utv 330 for vista,makasih ya mas

  35. Refit Gustaroska says:
    August 5, 2008 at 11:28 am

    maap mas, requestnya disini aja mas http://www.gadmei.com/en/support.aspx, disini ngebahas buat linux.

  36. Dedi Susanto says:
    August 9, 2008 at 10:46 am

    Mas, saya punya masalah yang kurang lebih sama, yaitu pada saat record movie dari TV tunner maupun VCD/DVD player yang ke record cuma gambarnya doang, suaranya nihil alias bisu. Saya pake PCI TV Tuner Gadmei Magician PT218F dan PT318F, driver dan instalasinya tidak ada masalah di WinXP SP2. Mohon pencerahannya dong mas…Thx.

  37. gandhos says:
    August 19, 2008 at 11:54 am

    Saya punya Gadmei utv330
    dan kebetulan cd driver nya ilang nah saya mau cari driver usb 2861 kok susah bener ya ada yg tahu dimana saya bisa cari gak untuk XP

  38. hadrawi says:
    September 12, 2008 at 8:56 pm

    saya punya TV tuner gadmei, setelah diinstal, USB Driver 2861 kok nggak terdeteksi, gimana solusinya dan mendownload Driver USB nya agar bisa jalan TV tuner tersebut…!!!

  39. agus s says:
    September 26, 2008 at 3:17 pm

    mohon bantuan driver usb, app dan directx untuk gadmei utv 330 tv tuner, trim

  40. agus sp says:
    October 11, 2008 at 9:51 am

    Saya punya Gadmei utv330
    dan kebetulan cd driver nya ilang nah saya mau cari driver usb 2861 kok susah bener ya ada yg tahu dimana saya bisa cari gak untuk XP

  41. poerwantono says:
    October 12, 2008 at 6:30 am

    mohon informasinya. langkah-2 sudah saya ikuti, saat saya make, muncul sbb : panjang banget..

    terus di folder /dev kok tidak ada folder video*, folder ini kapan terbuat ya ?

    tks atas bantuanya.

    make -C /lib/modules/2.6.22.14-72.fc6/build SUBDIRS=/usr/src/v4l-dvb/v4l modules
    make[2]: Entering directory `/usr/src/kernels/2.6.22.14-72.fc6-i686′
    CC [M] /usr/src/v4l-dvb/v4l/em28xx-video.o
    In file included from /usr/src/v4l-dvb/v4l/em28xx-video.c:43:
    /usr/src/v4l-dvb/v4l/em28xx.h:41:26: error: xc3028-tuner.h: No such file or directory
    In file included from /usr/src/v4l-dvb/v4l/em28xx-video.c:43:
    /usr/src/v4l-dvb/v4l/em28xx.h:501: error: field ‘xc3028conf’ has incomplete type
    /usr/src/v4l-dvb/v4l/em28xx-video.c: In function ‘em28xx_v4l2_open’:
    /usr/src/v4l-dvb/v4l/em28xx-video.c:402: error: ‘V4L2_INT_TUNER_ANALOG_TV’ undeclared (first use in this function)
    /usr/src/v4l-dvb/v4l/em28xx-video.c:402: error: (Each undeclared identifier is reported only once
    /usr/src/v4l-dvb/v4l/em28xx-video.c:402: error: for each function it appears in.)
    /usr/src/v4l-dvb/v4l/em28xx-video.c:427: error: ‘V4L2_INT_TUNER_DVBC_TV’ undeclared (first use in this function)
    /usr/src/v4l-dvb/v4l/em28xx-video.c:428: error: ‘V4L2_INT_TUNER_DVBT_TV’ undeclared (first use in this function)
    /usr/src/v4l-dvb/v4l/em28xx-video.c:429: error: ‘V4L2_INT_TUNER_ATSC_TV’ undeclared (first use in this function)
    /usr/src/v4l-dvb/v4l/em28xx-video.c:456: error: ‘v4l2_type_names’ undeclared (first use in this function)
    /usr/src/v4l-dvb/v4l/em28xx-video.c: In function ‘em28xx_release_resources’:
    /usr/src/v4l-dvb/v4l/em28xx-video.c:523: error: ‘MINOR_VFL_TYPE_GRABBER_MIN’ undeclared (first use in this function)
    /usr/src/v4l-dvb/v4l/em28xx-video.c:527: error: ‘MINOR_VFL_TYPE_VBI_MIN’ undeclared (first use in this function)
    /usr/src/v4l-dvb/v4l/em28xx-video.c: In function ‘em28xx_stream_interrupt’:
    /usr/src/v4l-dvb/v4l/em28xx-video.c:1083: error: ‘MINOR_VFL_TYPE_GRABBER_MIN’ undeclared (first use in this function)
    /usr/src/v4l-dvb/v4l/em28xx-video.c: At top level:
    /usr/src/v4l-dvb/v4l/em28xx-video.c:1352: error: expected declaration specifiers or ‘…’ before ‘v4l2_kioctl’
    /usr/src/v4l-dvb/v4l/em28xx-video.c: In function ‘em28xx_do_ioctl’:
    /usr/src/v4l-dvb/v4l/em28xx-video.c:1367: warning: implicit declaration of function ‘v4l2_video_std_construct’
    /usr/src/v4l-dvb/v4l/em28xx-video.c:1714: warning: implicit declaration of function ‘v4l_compat_translate_ioctl’
    /usr/src/v4l-dvb/v4l/em28xx-video.c:1715: error: ‘driver_ioctl’ undeclared (first use in this function)
    /usr/src/v4l-dvb/v4l/em28xx-video.c: In function ‘em28xx_video_do_ioctl’:
    /usr/src/v4l-dvb/v4l/em28xx-video.c:1736: warning: implicit declaration of function ‘v4l_print_ioctl’
    /usr/src/v4l-dvb/v4l/em28xx-video.c:2044: error: too many arguments to function ‘em28xx_do_ioctl’
    /usr/src/v4l-dvb/v4l/em28xx-video.c: In function ‘em28xx_v4l2_ioctl’:
    /usr/src/v4l-dvb/v4l/em28xx-video.c:2072: warning: implicit declaration of function ‘video_usercopy’
    /usr/src/v4l-dvb/v4l/em28xx-video.c: At top level:
    /usr/src/v4l-dvb/v4l/em28xx-video.c:2087: error: ‘v4l_compat_ioctl32′ undeclared here (not in a function)
    /usr/src/v4l-dvb/v4l/em28xx-video.c: In function ‘em28xx_init_dev’:
    /usr/src/v4l-dvb/v4l/em28xx-video.c:2147: error: ‘TUNER_XCEIVE_XC3028′ undeclared (first use in this function)
    /usr/src/v4l-dvb/v4l/em28xx-video.c:2149: error: ‘TUNER_QT1010′ undeclared (first use in this function)
    /usr/src/v4l-dvb/v4l/em28xx-video.c:2256: error: ’struct video_device’ has no member named ‘type’
    /usr/src/v4l-dvb/v4l/em28xx-video.c:2258: error: ’struct video_device’ has no member named ‘type’
    /usr/src/v4l-dvb/v4l/em28xx-video.c:2259: error: ’struct video_device’ has no member named ‘hardware’
    /usr/src/v4l-dvb/v4l/em28xx-video.c:2265: error: incompatible types in assignment
    /usr/src/v4l-dvb/v4l/em28xx-video.c:2296: error: ’struct video_device’ has no member named ‘type’
    /usr/src/v4l-dvb/v4l/em28xx-video.c:2297: error: ’struct video_device’ has no member named ‘hardware’
    /usr/src/v4l-dvb/v4l/em28xx-video.c:2300: error: incompatible types in assignment
    /usr/src/v4l-dvb/v4l/em28xx-video.c:2315: error: ‘MINOR_VFL_TYPE_VBI_MIN’ undeclared (first use in this function)
    /usr/src/v4l-dvb/v4l/em28xx-video.c:2319: error: ‘MINOR_VFL_TYPE_GRABBER_MIN’ undeclared (first use in this function)
    make[3]: *** [/usr/src/v4l-dvb/v4l/em28xx-video.o] Error 1
    make[2]: *** [_module_/usr/src/v4l-dvb/v4l] Error 2
    make[2]: Leaving directory `/usr/src/kernels/2.6.22.14-72.fc6-i686′
    make[1]: *** [default] Error 2
    make[1]: Leaving directory `/usr/src/v4l-dvb/v4l’
    make: *** [all] Error 2

  42. poerwantono says:
    October 12, 2008 at 7:21 am

    mohon info lanjutannya, setelah saya selikidi, ternyata saya ada sleip di replace update dari zip, bukan ke dev/video tapi ke folder em28xx nya, jadi saya ulang dari awal setelah folder v4l nya saya hapus lalu saya clone ulang, waktu di make malah tambah banyak errornya.

    sedangkan waktu di dmesg hasilnya sbb :

    dibagian akhirnya sbb

    em28xx #0: card=59 -> Terratec Cinergy A Hybrid XS
    em28xx #0: card=60 -> Plextor ConvertX PX-TV100U
    em28xx #0: card=61 -> Kworld VS-DVB-T 323UR
    attach_inform: eeprom detected.
    em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 61 28 50 00 13 03 6a 22 00 00
    em28xx #0: i2c eeprom 10: 00 00 04 57 4e 03 00 00 00 00 00 00 00 00 00 00
    em28xx #0: i2c eeprom 20: 06 00 01 01 f0 10 01 00 4a 00 00 00 5b 00 00 00
    em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 02 01 00 00 00 00
    em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00
    em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 36 00 31 00 20 00 44 00
    em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00
    em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    EEPROM ID= 0×9567eb1a
    Vendor/Product ID= eb1a:2861
    AC97 audio (5 sample rates)
    500mA max power
    Table at 0×04, strings=0×226a, 0×0000, 0×0000
    em28xx #0: found i2c device @ 0×4a [saa7113h]
    em28xx #0: found i2c device @ 0xa0 [eeprom]
    em28xx #0: found i2c device @ 0xc0 [tuner (analog)]
    em28xx #0: Found Generic EM2861 video grabber
    em28xx audio device (eb1a:2861): interface 1, class 1
    em28xx audio device (eb1a:2861): interface 2, class 1

    mohon bantuannya..

  43. Refit Gustaroska says:
    October 13, 2008 at 8:20 am

    Saran saya di edit manual aja mas poerwantono, ga usah replace dari em28xx.zip, mungkin udah banyak perubahan jg dari sananya.

    Kalo pengen dapet source terbaru (development) drivernya bisa cekout dari sini http://mcentral.de/hg/~mrec/em28xx-new, developmentnya pindah kesitu, yg experimental udah ga dipake

  44. Refit Gustaroska says:
    October 13, 2008 at 9:51 am

    atau coba baca ini http://www.indragunawan.com/2008/09/gadmei-utv330-di-linux.html

  45. berhasil says:
    October 24, 2008 at 11:07 pm

    wah gw berhasil install padahal tadi ngalami driver ga bisa ke detect. tinggal ikutan perintah di atas.
    sangat menolong nih!tinggal kopi paste ajah!

  46. pusing says:
    October 24, 2008 at 11:09 pm

    gmana nih ga bisa ke detect drivernya mana yang harus di edit.
    gw make windows xp.

  47. Refit Gustaroska says:
    October 25, 2008 at 6:13 am

    mas pusing, tolong dibaca dgn seksama donk, tutorial diatas kan buat linux!!!

  48. Dedi says:
    November 5, 2008 at 7:18 pm

    gw pnya 330 yg Window Xp Sp2, tetap aja driver gak kebaca. ada yg bisa banti gak?? please….. bantuanya!!!

  49. Pungki says:
    November 20, 2008 at 1:23 pm

    Mas mas yg baek ada link bwt download full driver n interface nya sekalian buat si Gadmei ini. CD nya hilang :))

    Aku pake Vista…

    Please ya..

  50. AUDHIE says:
    January 3, 2009 at 9:11 pm

    MAS, mohon bantuannnya!!!

    Selama seharian saya sudah cari link buat download driver TV CARD gadmei PT318f, mas mas disini ada yang punya ?

    mohon bantuannya ya!!!!
    thanksyou banget

Newer Comments »

Leave a Reply

CommentLuv Enabled
:-)) :-) :-D (LOL) :-P (woot) ;-) :-o X-( :-( :-&amp; (angry) (annoyed) (bye) B-) (cozy) (sick) (: (goodluck) (griltongue) (mmm) (hungry) (music) (tears) (tongue) (unsure) (highfive) (dance) (doh) (brokenheart) (drinking) (girlkiss) (rofl) (money) (rock) (nottalking) (party) (sleeping) (thinking) (bringit) (worship) (applause) 8-) (gym) (heart) (devil) (lmao) (banana_cool) (banana_rock) (evil_grin) (headspin) (heart_beat) (ninja) (haha) (evilsmirk) (bigeyes) (funkydance) (idiot) (lonely) (scenic) (hassle) (panic) (okok) (yahoo)
«
»